- Climbing pet constant temperature heating padServo to Shaft Coupler (H25T Spline, 1/4-inch Bore)

• Servo to Shaft Coupler (H25T Spline, 1/4-inch Bore)
• Allows you to drive a 1/4 inch round shaft
• Material: Brass
• Servo Spline Compatibility: 25 Tooth (H25T Spline) Spline
• Bore: 1/4 inch

The Servo to Shaft Coupler (H25T Spline, 1/4-inch Bore) allows you to drive a 1/4 inch round shaft or 1/4 inch D-shaft with a 25 tooth spline servo. The screw that holds the coupler onto the servo needs to be installed first, followed by the 1/4-inch shaft to be driven. The M5 set-screw can then be tightened down with a 2.5mm hex driver for a tight hold on the shaft.